CBC-EVAL-05

The CBC-EVAL-05 evaluation kit is used to demonstrate the capabilities of the EnerChip Thin film batteries and the EnerChip CC with Integrated battery management capabilities. Two EnerChip CC devices are on the evaluation board, a CBC3112 and a CBC3150, with battery capacities of 12μAh and 50μAh, respectively. The evaluation board utilizes a 24pin DIP format that mates with a 24pin DIP socket on a target board. During normal operation, the EnerChip CC charges itself with a controlled voltage using an internal charge pump that operates from 2.5V to 5.5V. An enable pin allows the designer to activate and deactivate the charge pump using an external control line in order to minimize current consumption and take advantage of the fast recharge time of the EnerChip. When the primary power supply dips below a user defined threshold voltage, the EnerChip CC will signal this event and route the battery voltage to VOUT.

• Power manager with charge control
• Integrated 12μAh and 50μAh thin film energy storage
• Built in energy storage protection
• Temperature compensated charge control
• Adjustable switchover voltage
• Charges integrated EnerChip over a wide supply range
• Low standby power
• Thousands of recharge cycles
• Low self discharge

Alkalmazások

Consumer Electronics, Alternative Energy, Wireless, Power Management, Industrial, Test & Measurement, Clock & Timing, Sensing & Instrumentation, Communications & Networking, Metering

Figyelmeztetések

The EVAL-05 module is sensitive to electrostatic discharge (ESD) and must be handled accordingly.