Az alább kiemelten megjelenő mezőkbe érvénytelen karaktereket tartalmazó adatot írt. Kérjük, csak érvényes karakterek használatával adja meg választását.

A termék nem biztos, hogy pontosan megfelel a keresettnek

Ezt a terméket Ön korábban megvásárolta. Megtekintés a rendelési előzményekben

 
 

8.08.27 J-LINK/FLASH BREAKPOIN

JTAG EMULATOR, J-LINK, FLASHBP

SEGGER 8.08.27 J-LINK/FLASH BREAKPOIN
×

Az ábra csak illusztráció. Tekintse meg a termékleírást.

Gyártó:
SEGGER SEGGER
Gyártói cikkszám:
8.08.27 J-LINK/FLASH BREAKPOIN
Rendelési kód:
2098554
Az összes technikai dokumentum megtekintése

Alternatíva a következőhöz: 8.08.27 J-LINK/FLASH BREAKPOIN

Termékáttekintés

The 8.08.27 is a bundle of hardware item J-Link and software item J-Link ARM flash breakpoints. The J-Link is a USB powered JTAG emulator supporting a large number of CPU cores. Based on a 32bit RISC CPU, it can communicate at high speed with the supported target CPUs. J-Link is used around the world in tens of thousand places for development and production (flash programming) purposes. It is supported by all major IDEs such as IAR EWARM, Keil MDK, Rowley CrossWorks, Atollic TrueSTUDIO, IAR EWRX, Renesas HEW, Renesas e2studio and many others. The J-Link ARM flash breakpoints is a software comes with an additional feature, called unlimited flash breakpoints. The unlimited flash breakpoints allow the user to set an unlimited number of breakpoints when debugging in flash memory. Without this feature, the number of breakpoints which can be set in flash is limited to the number of hardware breakpoints supported by the debug unit of the CPU.
  • J-Link supports concurrent access to CPU by multiple applications
  • Download speed up to 1MByte/second
  • Supports unlimited breakpoints in flash memory
  • Free software updates, 1 year of support
  • Direct download into flash memory of most popular microcontrollers supported
  • Target power supply: J-Link can supply up to 300mA to target with overload protection
  • Remote server included. Allows using J-Link remotely via TCP/IP
  • Supports JTAG chains with multiple devices
  • J-Link flash breakpoints can also be used with J-Link ARM RDI and J-Link GDB server
  • Usable and convenient

Alkalmazások

Embedded Design & Development

Tartalom

J-Link, Ribbon cable, USB cable, J-Link ARM flash breakpoints.

Termékinformáció

Szeretne hasonló termékeket megtekinteni? Csak válassza ki a kívánt attribútumokat alább, és kattintson a gombra ×


:
USB JTAG Emulator

:
-

:
-

:
-

:
Emulator USB JTAG

:
Supports ARM, Cortex-M, Cortex-A, RX000 Series & Cortex-R4 MCUs, USB Interface

:
-

Hasonló termékek keresése Hasonló termékek kereséséhez válassza ki és módosítsa a fenti jellemzőket.

Műszaki dokumentáció (2)

Továbbiakban nem gyártják

121 145,005 Ft

Ár nem áll rendelkezésre. Kérem, Forduljon az ügyfélszolgálathoz.

Adott egységre meghatározott ár:
darab
Több: 1 Legalább: 1
  • 1+
Mennyiség Ár Az Ön ára
 
 
1+ 121 145,005 Ft
Promóciós ár
Szerződéses ár
Internetes ár
Internetes rendelésekre vonatkozó szerződéses ár
 
Mennyiség Ár Az Ön ára
 
 

Ár nem áll rendelkezésre. Kérem, Forduljon az ügyfélszolgálathoz.

No longer stocked:: No Longer Manufactured::
Hozzáadás a kosárhoz Hozzáadás a kosárhoz Előrendelés
Hozzáadás
Korlátozottan elérhető tétel
Cikkszám /Tétellel kapcsolatos megjegyzés hozzáadása
Teljes ár:
Teljes ár: ( )
Teljes ár: --